Disinfectants

Veltek Associates Inc. (VAI®), headquartered in Malvern, PA has pioneered the design and manufacture of hundreds of cleanroom solutions that surround contamination control. These innovations, many of them landmarks in the industry’s history, provide solutions to overcome challenges. With today’s complex research challenges, new competition, and increasing government regulations, reliable disinfectants are more important than ever.

Decon-ahol (70% IPA)

EPA registered DECON-AHOL WFI® Formula is formulated with 70% USP Isopropyl Alcohol (IPA) and 30% USP Water for Injection (WFI). It is an EPA registered hard surface disinfectant and sanitizer when used as directed.

DECON-AHOL WFI Formula Products have been designed specifically for pharmaceutical, biotechnology, healthcare, and medical device cleaning rotations for use in both aseptic and non-aseptic environments.

Each sterile container is double bagged
Quadruple bagged in the ABCD Cleanroom Introduction System®
Delivered with lot specific Certificate of Analysis, Certificate of Sterility, Certificate of Irradiation, and LAL Test Report tested to current USP compendium
Individually labeled with lot number and expiration
Low remaining residue
Low in endotoxin levels
For use on a multitude of surfaces
Ready-to-use

Ster-ahol (Ethanol)

EPA registered denatured ethanol formulated to 70% with a small percentage of methyl alcohol and 30% USP Water for Injection for use as a sanitizer and disinfectant in classified manufacturing and testing environments.

STER-AHOL® WFI Formula can be used for the disinfection and decontamination of cleanrooms, controlled areas, hard non-porous environmental surfaces, and many other applications that require the use of a sterile alcohol solution. STER-AHOL WFI Formula has been designed for use in the pharmaceutical, biotechnology, medical device, healthcare, and diagnostic manufacturing facilities.

Each sterile container is double bagged packaged in easy tear bags
Quadruple bagged in the ABCD Cleanroom Introduction System®
Individually labeled with lot number and expiration
Delivered with lot specific Certificate of Analysis, Certificate of Irradiation, Certificate of Sterility, and LAL Test Report tested to current USP compendium
For use on a multitude of surfaces:
- Non-food contact, hard non-porous, inanimate surfaces
- Aseptic filling and gowning rooms
- Manufacturing areas and laboratories
- Machinery, tools, tables, counters, laminar flow benches, floors, walls, carts, shelves
- Glass, plastic, vinyl, chrome, stainless steel

Decon-Quat

DECON-QUAT® 100, a quaternary ammonium solution, and DECON-QUAT® 200C, a fifth generation quaternary ammonium solution, were both developed for use in cleaning rotation cycles where hard surface disinfectants are required to maintain a clean environment.

DECON-QUAT 100 an EPA registered one-step, phosphate-free, quaternary ammonium solution that is a proven cleaner, sanitizer, mildewstat and virucide. DECON-QUAT 100 is a broad-spectrum hard surface disinfectant in presence of organic soil (5% blood serum) when used as directed.

DECON-QUAT 100 is recommended for the use in the pharmaceutical, lab animal, biotechnology, medical device, and healthcare industries. DECON-QUAT 100 has been designed to provide effective cleaning, deodorizing, and disinfection in areas where housekeeping and controlling the hazards of cross-contamination in treated surfaces is of prime importance.

Cleaner – Disinfectant – Sanitizer – Deodorizer – Fungicide – Mildewstat – Virucide*

DECON-QUAT 200C an EPA registered, one-step, fifth generation quaternary ammonium solution. When used as directed, DECON-QUAT 200C is highly effective against a broad spectrum of pathogenic microorganisms including bacteria, anti-biotic resistant bacteria, viruses*, fungi, mold, and mildew. DECON-QUAT 200C is effective in hard water up to 400 ppm hardness (Calculated as CaCO3) in the presence of 5% serum contamination.

DECON-QUAT 200C is recommended for use in pharmaceutical, biotechnology, and medical device manufacturing facilities, in healthcare facilities, and hospitals. DECON-QUAT 200C is a neutral pH and phosphate-free formulation designed to provide effective cleaning, deodorizing, and disinfection in areas where housekeeping is of prime importance in controlling the hazard of cross-contamination on treated surfaces.

Product uses:

Hard, inanimate surfaces in filling and gowning rooms
General manufacturing areas
Machinery tables, counter tops, laminar flow benches, floors, and walls
Stainless steel, porcelain, glass, and chrome

Decon-Phene II

VAI manufactures a high pH, phosphate free, sterile pharmaceutical cleanroom formula phenolic that has been formulated for effective aseptic controlled environment “cleanroom” sanitation. DECON-PHENE® II is an effective sanitizer on inanimate, non-porous, non-food contact surfaces demonstrated in testing against Staphylococcus aureus (ATCC# 6538) and Klebsiella pneumonia (ATCC# 4352) in 5 minutes.

DECON-PHENE II is acceptable for use by the pharmaceutical, biotechnology, hospital, and healthcare industries. DECON-PHENE II can be used on hard, inanimate surfaces in aseptic filling and gowning rooms and general manufacturing areas.

DECON-PHENE II is available in multiple container sizes including in our patented SimpleMix system that allow for safe and fresh dilutions every single time.

Product Uses:

Aseptic controlled environments, aseptic filling and gowning rooms
General manufacturing areas
Hard nonporous surfaces materials
Machinery, tables, counters, laminar flow benches, floors, and walls
Stainless steel, chrome plated steel, brass, copper, aluminum, fiberglass, formica, nylon, lexan, Plexiglas, acrylic, vinyl, glazed porcelain, glass, latex, and enamel

HYPO-Chlor

VAI® manufactures three EPA registered sodium hypochlorite solutions, formulated with USP Water for Injection and concentrated at 0.25%, 0.52%, or 5.25%, that are used to disinfect and sanitize cleanrooms and controlled areas. HYPO-CHLOR® products are effective, one-step, ready-to-use, sanitizers, disinfectant, and fungicides.

HYPO-CHLOR Products are recommended for use in healthcare institutions, biopharmaceutical, medical device, and diagnostic manufacturing facilities. HYPO-CHLOR Products have been developed for use in cleaning rotation cycles on most washable, non-porous, hard, inanimate environmental surfaces for maintaining a clean environment.

Each sterile container is double bagged in easy tear packaging
Quadruple bagged in the ABCD Cleanroom Introduction System®
Individually labeled with lot number and expiration
Delivered with lot specific Certificate of Analysis and Certificate of Sterility tested to current USP compendium
Specifically formulated as a sterile cleanroom pharmaceutical formula
Available in three ready-to-use solutions: 0.25%, 0.52%, and 5.25%
Designed for all washable environmental surfaces
16 oz containers come with sterile spray attachment

Decon-Spore 200 Plus

VAI® manufactures an EPA Registered Peracetic Acid and Hydrogen Peroxide solution that is for use as a broad spectrum sanitizer, disinfectant, virucide, sporicide, sterilant, fungicide, cleaner and deodorizer. DECON-SPORE 200® Plus is a proven “one-step” disinfectant – virucide that cleans as it disinfects in one operation and has been shown to be effective in water up to 400 ppm hardness in the presence of 5% serum contamination.

DECON-SPORE 200 Plus is recommended for use in the pharmaceutical, biotechnology, medical device, hospital, healthcare, and lab animal research industries. DECON-SPORE 200 Plus has been developed for use in cleaning rotation cycles where hard surface disinfectants are essential to maintaining a clean environment.

DECON-SPORE 200 Plus is available in four dilution ratios: as a concentrate, as a disinfectant dose, as a sporicidal dose, and at a 3% dilution dose. DECON-SPORE 200 Plus 3% dilution (3 oz/gal) dose is for use specially in healthcare and hospital facilities as a one-step hospital use germicidal disinfectant, cleaner, and deodorant.

Each sterile container is individually bagged in easy tear packaging
Each sterile container of SimpleMix is individually double bagged in easy tear packaging
Individually labeled with lot number and expiration
Delivered with lot specific Certificate of Analysis and Certificate of Sterility tested to current USP compendium
Available in three configurations: concentrate, disinfectant use dilution, and sporicidal use dilution
Available in the convenient, one-step, ready-to-use, SimpleMix® System made with USP Water for Injection (0.25 EU/mL)
Concentrated broad-spectrum disinfectant-virucide
Disinfects as it at cleans in one operation
Designed for the sterilization of manufacturing, filling, and packaging equipment in aseptic processes
Proven one-step disinfectant-cleaner for use in healthcare settings and quickly removes dirt, grime, blood, and other organic matter commonly found in healthcare facilities
Effective disinfectant in water up to 500ppm hardness in the presence of 5% serum contamination and dried soap film residue

Sterile Lubricants and Oil

STERI-OIL 200 is a sterile mineral oil lubricant used for lubricating machinery in aseptic areas. The heavy consistency provides lubrication and prevents metal to metal contact, withstands high friction without displacement, and reduces metal fatigue.

STERI-SILICON is a sterile silicon lubricant and releasing spray that is processed for use in aseptic areas. STERI-SILICON is excellent for machinery lubrication which is an essential step for trouble free equipment operation during manufacturing. This product is colorless, stabile, and specifically designed to speed processing in heat sealing, packaging, and process machinery.